6 Cute Crochet Fingerless Gloves Patterns for Teens & Adults

Fingerless gloves are the perfect small-project gift: fast to make, practical (phone-friendly!), and endlessly customizable. Below you’ll find six full, beginner-friendly to intermediate crochet patterns — each with materials, three size options (Teen / S / M-L), clear step-by-step instructions (worked mostly in the round), thumb-hole shaping, finishing, and styling/variation ideas so you can make the exact pair you want.

Before you start: read the abbreviations, measure your hand, and pick the yarn and hook that match the intended look (lacy, chunky, vintage, playful). I’ve included tips for adjusting size and tension so you can confidently scale for different hands.

Quick legend — abbreviations (US crochet terms)

• ch — chain
• sc — single crochet
• hdc — half double crochet
• dc — double crochet
• tr — treble (tr)
• sl st — slip stitch
• st(s) — stitch(es)
• rep — repeat
• inc — 2 sc in same stitch (increase)
• dec — sc2tog (decrease)
• BLO / FLO — back/front loop only
• RS — right side (outside)
• RSFS — right side facing you (for joins)
• … — repeat instructions between asterisks

Pattern notes you’ll use across patterns

1. Sizing: measure wrist circumference at the narrowest point and hand circumference across knuckles (exclude thumb). Also measure desired glove height (wrist → base of fingers) and thumb position (from wrist up).
2. Gauge example: many patterns include example stitch counts for a gauge of 4 stitches per inch (typical for worsted yarn with a 4.5–5.0 mm hook). If your gauge differs, use stitches/inch from your swatch to calculate chain counts: target circumference × stitches per inch = number of stitches. Aim for a snug but comfortable fit.
3. Construction commonalities: Most gloves below are made in a round from wrist up, with a short thumb opening (chain bridge) worked during a round, then the glove continues. Later you pick up chains for the thumb tube and crochet a few rounds.

1. Crochet Lurex Yarn Lace Fingerless Gloves Pattern

A sparkly, lacy pair for evenings out — lightweight, delicate, and glamorous. Works best with fingering or sport weight yarn that contains a subtle lurex strand.

Skill: Easy–Intermediate (working shell lace in rounds)
Materials

• Fingering/sport weight yarn with metallic (lurex) strand or hold a sparkle thread with a fine yarn (approx. 150–200 yds total per pair).
• Hook: 3.25–3.75 mm (adjust to get a nice lacy fabric).
• Tapestry needle, stitch marker.

Sizes & example stitch counts (if gauge ≈ 4 sts/in)

• Teen (knuckle circumference ~6.5″): 26 sts
• Small (7.0″): 28 sts
• Medium/Large (8.0″): 32 sts

Gauge swatch suggestion: 4 sts × 3 rows = 1″ in ch-1 shell pattern — swatch before you start.

Lace pattern (shell repeat)

A simple shell row: ch 1, sc in next st; ch 3, 5 dc in next st (shell), ch 3, sc in next st — shells are worked every 3–4 stitches depending on repeat.

Step-by-step (worked in joined rounds — no visible seam)

1. Foundation: With chosen yarn and hook, ch number of stitches for your size (see counts above) + join with sl st being careful not to twist. Place marker at beginning of round. Example: for S = ch 28; join.
2. Round 1 (ribbed cuff base): Ch 1, sc in each st around; join. Work 6 rounds of sc for a neat cuff (or work 6 rounds of hdc for taller cuff). This gives snugness at wrist.
3. Start lace body — Round A: sc in next st, ch 3, skip 1 st, 5 dc in next st, ch 3, sc in next st — repeat across. Join with sl st to first sc. (If your stitch multiple doesn’t align perfectly, adjust a single st between repeats.)
4. Round B (spacer row): Ch 1, sc in each st and in each ch-3 space across (work sc into each ch-3 space and regular sc in visible stitches). Join.
5. Repeat Rounds A + B until glove height measures about 2″ less than the desired total height (leave room for a thumb opening). Typical glove body: 3–4 pattern repeats (about 2–3 inches) for a fingerless glove.
6. Thumb opening round: Work pattern until you reach the thumb start position (usually at side of palm — mark with a removable stitch marker during a test fit). When you hit the thumb start, ch 6 (this creates thumb opening — adjust to thumb width; 5–7 ch), skip same number of stitches across, and continue the round pattern across remaining stitches to end. Join.
   • Example: sc/ch3/shell pattern until marker; ch6; skip 6 sts; finish pattern.
7. Continue lace above thumb: Work 2–3 more lace rounds (A+B repeats) above the thumb opening to the desired top height. Finish with 1 round sc to tidy and bind off with sl st. Fasten off and weave ends.
8. Make thumb tube: Using a tapestry needle, pick up loops along the chain-bridge (through the ch-6 bridging loops) OR with hook and yarn rejoin at bridge edge and work 6–8 rounds sc into the chain foundation to form a thumb tube. Finish with sl st and weave in ends.

Finishing & styling

• Lightly steam-block the gloves to open the shell lace and help drape.
• Add a tiny bead or metal charm near cuff with a few secure stitches for a glam accent.
• For warmer gloves, hold one strand of lace yarn together with a fine merino to create a plusher fabric.

2. Crochet Kawaii Cat Paw Fingerless Gloves Pattern

Adorable paw pads — embroidered or crocheted appliqués — make these playful and perfect for teens. Works well with DK/worsted yarn for squishy pads.

Skill: Beginner → Easy (basic stitches + applique)
Materials

• Worsted weight yarn for main glove (A) and contrast (B) for paw pads (approx. 150 yds total).
• Hook: 4.0 mm (G)
• Tapestry needle, small amounts of stuffing for puff pads (optional), small safety eyes or embroidered nose if you want a kitty face on back (optional).

Sizes (stitch counts at 4 sts/in)

• Teen: 26 sts
• Small: 28 sts
• Medium/Large: 32 sts

Paw pad applique (small oval + three little pads)

Small pad (toe pads, make 3)

• MR, ch 1, 6 sc in MR — join to first sc. Fasten off leaving tail to sew. This makes a tiny pad circle.

Large pad (palm pad)

1. MR, 6 sc in MR. (6)
2. inc around (12)
3. sc 1, inc around (18) — fasten off and stuff lightly if puff effect wanted. Leave tail to sew.

Glove body (rounds)

1. Foundation: ch number of sts for size (26/28/32) join.
2. Ribbed cuff: ch 1, sc around for 6 rounds or until cuff depth ~1.75″. Join.
3. Body: Work hdc rounds (or dc rounds for open fabric) in spiral or joined rounds until thumb position (measure approx. 2–2.5″ from start for thumb at base of palm). Example: 6–8 rounds of hdc.
4. Thumb opening: Determine thumb start (usually at seam between palm and back). Work until marker then ch 6, skip 6 sts, continue round. Join.
5. Continue body above thumb: Work 4–6 more rounds of hdc or dc for the back of hand to the base of fingers. Finish with 1 round sc for edge.

Attach appliqués

• Arrange three small toe pads above the large palm pad on the back of glove. Sew each pad securely with yarn tails sewn through the glove and tied off inside. For a puffy pad, add a tiny bit of stuffing before closing.
• Optional: embroider tiny claws (three short stitches) with white or contrast color on each toe pad for cute detail.

Thumb tube

• Rejoin at chain bridge and sc around chain loops for 6 rounds (or fewer for smaller thumbs). Finish and weave in ends.

Variations & tips

• Make a cat-face on the back: embroider a small triangle nose above the large pad and three whiskers per side. Add two small felt or crocheted ears sewn to top edge for full kitty look.
• Use faux-fur yarn for cuff trim for extra cuteness.

3. Crochet Granny Square Fingerless Gloves Pattern

Combine vintage Granny Squares for a boho-chic glove — make two small joined squares per glove for a decorative hand panel.

Skill: Beginner → Intermediate (joining squares + basic granny)
Materials

• DK or worsted yarn (contrast for square centers) — about 150–200 yds per pair.
• Hook: 4.0–4.5 mm.
• Tapestry needle.

Sizes: Use square size to control width. Example: make granny squares that finish about 3.5–4.0″ wide for Teen/S, and 4.5–5.0″ for M/L. You’ll use two squares across the wrist/hand circumference (joined).

Small granny square (classic)

1. Round 1: MR, ch 3 (counts as dc), 2 dc into ring, ch 2, 3 dc into ring, ch 2 rep 3 more times — join to ch-3. (4 clusters = 4 corners.)
2. Round 2: Slip into next ch-2 space, ch 3, 2 dc, ch 2, 3 dc (corner); ch 1, 3 dc, ch 2, 3 dc in each ch-2 space around; join. Repeat rounds until square reaches desired size.

Make two squares per glove: a back-of-hand square and a palm square (or make two identical and seam so palm/back show).

Assembly into glove tube

1. With RS facing, place two squares side-by-side with the seam in the middle of hand width (i.e., squares meet at their edges). Using yarn and whipstitch or single crochet join, seam along the outer edges to create a tube that will slip over the wrist/hand. Leave holes at the top edge for fingers and a gap for thumb by leaving about 3–4 stitches unsewn at appropriate place (or create thumb opening later).
2. If your squares are slightly smaller than needed, join 3 small squares (one across back, one across palm + 1 for top) — this is a flexible modular approach. Add narrow side gussets if necessary.

Thumb opening & finishing

• Option A (basic): After forming tube, try on and mark thumb position. With a small regular crochet hook, sc around the unseamed area to form thumb hole, then work a short thumb tube (3–5 rounds sc).
• Option B (during seam): Leave an opening of the correct width while seaming and later pick up stitches to work thumb tube.

Edging

• Work a round of sc around top and bottom edges to tidy and prevent stretching. Add a picot edge for a lacy vintage finish: (ch 3, sl st in 3rd ch) spaced every 4–6 sts.

Variation & styling

• Use variegated yarn for boho color, or make monochrome for elegant vintage.
• Add a small button to the outer seam or sew a tiny charm on cuff.

4. Crochet Victoria Vintage Fingerless Gloves Pattern

Delicate Victorian lace motif with a small scalloped cuff and picot edge — elegant for vintage looks and formal wear.

Skill: Intermediate (lace stitches, picot edge)
Materials

• Fingering/DK lightweight yarn (cotton-blend for crisp lace), 150 yds/pair.
• Hook: 3.25–3.5 mm.
• Tapestry needle.

Sizes (example stitch counts at ~4 sts/in ch-shell gauge)

• Teen/S: 26 sts
• Small: 28 sts
• Medium/Large: 32 sts

Lace motif (small shell + chain arches)

This pattern uses small shells separated by chain arches to mimic Victorian lace.

Motif repeat (one round): sc, ch 3, 5 dc in next st, ch 3, sc in next st — that forms a single lace scallop across the round. Adjust spacing so the total stitches divide evenly.

Step-by-step

1. Cuff: ch your base count, join. Work 6 rounds of sc in the round to form a firm cuff.
2. Lace band: Row 1: sc, ch 3, skip 2, 5 dc in next st, ch 3, sc in next st — continue around (the skip/placement may require adjustment by 1 st for exact division). Join.
3. Stabilizer row: ch 1, sc across every stitch and into ch-3 loops (so that the next scallop sits centered). Join.
4. Repeat: Alternate the lace band and stabilizer row for 3–4 repeats until glove reaches desired height beneath the fingers.
5. Thumb opening: When you reach thumb position, work the lace pattern until thumb start; ch 5 (for thumb hole), skip 5 sts, continue pattern to end. Join. Work 2 more lace repeats above the thumb for the top of the hand. Finish with a delicate picot edge: ch 3, sl st in 3rd ch around top edge or the optional scalloped shell finish.
6. Thumb tube: Rejoin to chain gap and sc into chain stitches for 6–8 rounds. Finish with picot or small scallop at thumb rim.

Picot edge for Victorian flair

• After the final round, ch 3, sl st in 3rd ch spaced every 3–5 sc to create tiny, pointed picots — this gives a refined, vintage scallop.

Variations & wearing tips

• Use white or soft cream for a true Victorian feel.
• For colder weather, hold lace yarn with a thin mohair or silk strand to add warmth and halo without losing lace definition.

5. Crochet Hand Embroidered Lace Fingerless Gloves Pattern

A delicate lace glove with surface embroidery — the base is a neutral lacy tube, and you add floral embroidery by hand with contrasting yarn for a couture finish.

Skill: Intermediate (surface embroidery on crochet + lace base)
Materials

• DK cotton yarn for main glove, contrasting embroidery yarn/thread (floss or thin cotton) for floral motifs.
• Hook: 3.5–4.0 mm.
• Tapestry needle.

Sizes: use same stitch counts as earlier (26/28/32) depending on gauge.

Base glove (simple mesh)

1. Foundation: ch to size and join for the tube.
2. Cuff: sc around 6 rounds.
3. Open mesh pattern: ch 2, sk 1 st, sc in next st repeat around; join. This creates a lacy openwork grid that is ideal for embroidery. Repeat mesh rows to desired height (approx. 2–3″ under fingers).
4. Thumb opening: Work mesh until thumb start; ch 5, skip 5 sts, continue; join. Work 2 more mesh rows above opening. Finish with one row of sc along top and bottom to stabilize.

Embroidery motifs (surface chain, satin stitch)

• Use basic embroidery stitches adapted for crochet: surface chain (laid yarn embroidered along the vertical bars), satin stitch (fill a petal area by couching short satin stitches along the mesh), backstitch for stems.
• Transfer simple floral motif: small bud + 3 leaves. With embroidery cotton and tapestry needle, anchor at the back and couch stitches across mesh vertical bars to form petal outlines. Fill lightly with satin stitch.

Step-by-step small flower (3 petals)

1. Bring embroidery thread up at center point. Make 3 short satin stitches (2–3 bars long) radiating from center (petals).
2. Use backstitch to make thin stem downward. Couch a thin chain stitch along the stem for texture.
3. Add tiny French knots (wrap needle twice) for flower center if you like.

Finishing & care

• After embroidery, press gently with a cool iron under a pressing cloth or block lightly to even out embroidery.
• Hand wash recommended to preserve embroidery unless using machine-washable threads and yarn and securing ends very well.

Styling & variations

• Make a series of different tiny blossoms and place them asymmetrically along the back of the hand for a “garden” glove.
• Use metallic embroidery thread sparingly for highlights (ex: golden stamen).

6. Crochet Christmas Fingerless Gloves Pattern

Festive, cozy, and cheerful — striped red & white with a small bobble snowflake on the back. Works great in worsted acrylic for machine-washable giftability.

Skill: Beginner → Easy (striping + bobble applique)
Materials

• Worsted acrylic yarn: Red (A) and White (B) — approx. 200 yds total pair.
• Hook: 4.5–5.0 mm.
• Tapestry needle.

Sizes (example counts at 4 sts/in)

• Teen: 26 sts
• Small: 28 sts
• Medium/Large: 32 sts

Simple stripe glove

1. Foundation chain: ch required count; join in round.
2. Cuff: work 6 rounds sc in white (B) for classic cuff.
3. Body (stripes): Alternate 2 rounds red (A), 2 rounds white (B) in hdc or dc for blocky festive stripes. Continue stripes until you reach thumb position (measure).
4. Thumb opening: On a white round, when you reach the thumb placement, ch 6 (or 5 for smaller thumbs), skip 6 sts, continue round. Join. Continue with stripes above thumb opening for 2–3 inches. Finish with one round of sc in white to tidy top.
5. Thumb tube: Rejoin at chain bridge and sc 6–8 rounds; finish with small white edge.

Snowflake bobble applique (simple)

Small raised bobble snowflake uses 5 bobble stitch petals around a center:

1. Center: MR, 6 sc in MR, sl st, fasten off leaving tail to sew.
2. Petals (make 5): Join white to MR or to edge of center: ch 2, (yo, insert, pull up loop) 3 times in same spot to create 3-loop puff, yo pull through all and sl st to base to tack petal. Repeat 5 times around. Fasten off leaving tail. Sew snowflake to back of glove.

Alternative embroidered snowflake: Use white embroidery thread and a few backstitches with French knot center for a flat snowflake.

Finishing touches

• Add a tiny jingle bell sewn at cuff interior (secure with extra stitches and knot concealed) for a playful holiday sound.
• For candy-cane look, use 1 round red, 1 round white alternating for skinny stripes.

Final finishing tips for all glove patterns

• Try on as you go. Especially when you plan the thumb opening — adjust chain count so thumb fits comfortably and palm coverage hits the base of fingers.
• Weaving ends: Weave ends on the inside of glove and tie with small secure knots; bury tails through several loops to keep them hidden.
• Blocking: For lacy gloves, lightly steam-block to open lace; for worsted gloves a light hand-squeeze block is enough. Avoid over-stretching.
• Care: Choose yarn appropriate to care needs — acrylic for machine wash, wool blends for warmth (hand wash recommended).
• Gauge adjustments: If your swatch shows more stitches/inch than the example, drop a hook size or increase chain counts accordingly.

Conclusion

Fingerless gloves are satisfying small projects that let you experiment with stitch textures, colorwork, and embellishment. Pick a style:

• Sparkly and evening-ready? Make the Lurex Lace.
• Cute and playful? The Kawaii Cat Paw or Christmas pairs are irresistible.
• Boho or slow-craft lover? The Granny Square grid is perfect.
• For vintage elegance, choose the Victoria Vintage lace.
• Want couture? Try Hand Embroidered Lace for a personalized statement.